CAP Oil Fluids

$100.00

CAP Oil Fluids

CAP Viscometer Oil Fluids are used for calibrating the CAP series of viscometers. It is important to note that each CAP spindle has its own fluid (see chart). Like silicone fluids, Cap Oil Standards are accurate to ±1% of viscosity value and are appropriate for use at shear rates greater than 500 sec^-1.

Add to cart

Categories: BrookField Viscosity Standard

Product Description

CAP Oil Fluids

FEATURES & BENEFITS:

Accuracy: +/-1% of viscosity value
Appropriate for use at shear rates greater than 500 sec^-1
Recommended for Brookfield CAP series Viscometers
Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes

Note: Other oil fluids are available – call for details
Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers

SPECIFICATIONS:

Cone Spindle	Brookfield Part #	Viscosity cP(mPa.s)	Brookfield Part #	Viscosity cP(mPa.s)
	HIGH TORQUE CAP
	Low Temp 25˚C		High Temp 60˚C
1	CAP1L	89	CAP1H	89
2	CAP2L	177	CAP2H	177
3	CAP3L	354	CAP3H	354
4	CAP4L	708	CAP4H	708
5	CAP5L	1417	CAP5H	1417
6	CAP6L	3542	CAP6H	3542
7	CAP7L	1328	CAP7H	1328
8	CAP8L	5313	CAP8H	5313
9	CAP9L	21250	CAP9H	21250
10	CAP10L	236	CAP10H	236

Brookfield Part #	Viscosity cP(mPa.s)	Brookfield Part #	Viscosity cP(mPa.s)
LOW TORQUE CAP
Low Temp 25˚C		High Temp 60˚C
CAP0L	57	CAP0H	57
CAP1L	89	CAP1H	89
CAP2L	177	CAP2H	177
CAP3L	354	CAP3H	354
CAP4L	708	CAP4H	708
CAP5L	1417	CAP5H	1417
CAP1L	89	CAP1H	89
CAP3L	354	CAP3H	354
CAP5L	1417	CAP5H	1417
CAP2L	177	CAP2H	177