IC control

IC control

$100.00

$100.00

Add to cart

Product Description

IC control

The IC control immersion circulator has an extended temperature range for tempering fluids in open and covered water baths up to 250 °C. The control circulator has a Wireless Controller (WiCo). The TFT display shows all relevant process parameters. The internal temperature regulation can be switched to external temperature with just one key. Push and turn buttons allow for intuitive menu navigation. The menu comes in different languages. With the innovative WiCo Wireless Controller, the unit can be operated from a distance of up to 10 meters/3 feet. All IKA baths conform to the highest safety classification III (FL) for use with flammable liquids according to DIN 12876. IC control immersion circulators allow for quick heat up times. The temperature stability is ± 0.01 K and the accuracy ± 0.2 K.

  • Temperature range: RT – 250 °C
  • Stainless steel bath bridge can be combined with water baths of different volumes
  • Wireless control enables safe operation, e.g. outside of a closed fume hood
  • Powerful pressure/suction pump
  • Adjustable safety circuit
  • Large easy to read TFT display for temperature, pump speed, liquid level and safety temperature
  • Electronic timer function: 0 – 99 h 59 min
  • Visual and acoustic safety warnings
  • Connection of a magnetic valve possible
  • USB / RS 232 interface for PC control, documentation using labworldsoft®, as well as updating the device software through our website
  • Integrated connections (M16x1) for external applications

 

Technical Data:

Appliance type Immersion thermostat
Class designation acc. DIN 12876 III
Identification according to DIN 12876 FL
Heat output 2500 W
Working temperature min. room temp. +10K @1000rpm °C
Working temperature max. 250 °C
Operating temperature min. (with external cooling) -20 °C
Operating temperature max. (with external heating) 250 °C
Temperature display yes
Temperature control PT 100
Working temperature sensor PT 100
Safety temperature sensor PT1000
Working temperature display TFT
Safety temperature display TFT
Temperature stability DIN 12876 0.01 ±K
Connection for ext. temperature sensor PT 100
Display resolution 0.01 K
Display for operation with ext. sensor yes
Set temperature resolution 0.1 ±K
Warning function optical yes
Warning function acoustic yes
Warning function excess temperature yes
Warning function insufficient temperature no
Adjustable safety circuit min. 0 °C
Adjustable safety circuit max. 260 °C
Sub-level protection yes
Over-level protection yes
Pump type Pressure- / suction pump
Pump capacity adjustable yes
Pump pressure max. (0 liters discharge flow) 0.61 bar
Pressure pump (suction side) (0 liter flow) 0.45 bar
Flow rate max. (0 bar back pressure) 31 l/min
Pump connection M16x1
Cooling coil connection NW 8
Bath depth min. 150 mm
Calibration option yes
Appliance fastener Bridge
Range of universal clamp min. 280 mm
Range of universal clamp max. 375 mm
Technical data complies with the standard DIN 12876
Permissible ON time 100 %
Dimensions (W x H x D) 285 x 313 x 291 mm
Weight 8.8 kg
Permissible ambient temperature 5 – 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 21
RS 232 interface yes
USB interface yes
Voltage 230 / 100 – 115 V
Frequency 50/60 Hz
Power input 2650 W
Back to top